星期四, 4月 23, 2015

前進到openSUSE 12.1 (Ati 硬解測試篇3)

不是早已經到 13.2版本了嗎?

標題是不是下錯,並沒有,只是因為好久沒有使用了,這網誌也開始往奇怪路線(誤)伺服器應用走了(誤)

還記得之前關於ati 硬解作的測試,當時是使用AMD 880 內顯晶片,前陣子購買了一張R7 250,想說就來測試一下吧,看看現在ATI到底進步了嗎。

首先開機進入系統之後進不了圖形介面,接下來到AMD 官網下載驅動安裝
接著測試執行VLC來撥放1080P

小提醒:開啟VLC,工具\偏好設定-->視訊:確認 accelerated video output(Overlay)是否打勾。輸入與編解碼器: Use GPU acceleration 打勾
開啟硬解時:

CPU-使用率大約落在20~40%左右!
哇塞:這真是太棒了,有種說不出的感動。
希望日後還有這方面相關的資訊繼續測試。
(N卡早在多年前就擺脫了這問題了吧,大笑,A卡加油啊)

LSI MegaRaid Monitor @Debian Linux

OS: OpenmediaVault (Debian 7.7)
RAID:MegaRaid 8300 xlp

#wge http://www.lsi.com/downloads/Public/RAID%20Controllers/RAID%20Controllers%20Common%20Files/8.07.10_MegaCLI_Linux.zip

#unzip 8.07.10_MegaCLI_Linux.zip

# cd 8.07.10_MegaCLI_Linux

#rpm2cpio MegaCli-8.07.10-1.noarch.rpm | cpio -idmv

#./opt/MegaRAID/MegaCli/MegaCli64 -AdpAllInfo -aALL

PS.you might need apt-install unzip , apt-install rpm2cpio
Now you can use command to get what you want  
For me ,it's my example.
/root/opt/MegaRAID/MegaCli/MegaCli64 -AdpALLInfo -aALL|grep 'Device Present' -A7

Reference
http://www.how2forge.info/megacli-for-debian-ubuntu/







星期二, 4月 14, 2015

Can’t create volume in Openfiler 2.99

The magic number is 60.
All you have to do is increasing 60 cylinders more in starting cylinders.

For example:

Before
 starting cylinders       ending starting cylinders
 177                              19581

After
 starting cylinders       ending starting cylinders
237                              19581
I hope it works out well for you!


裝好openfiler 時,會發現他一整個見鬼的不能增加磁區,後來看到網友說只要在起始磁區加上60就可以了,一試之下果然可以XD,希望你們也能順利解決這個問題。

Reference
Can't Add Partitions in Openfiler 2.99